DIGITAL ELECTRONICS PLC


Kanal geosi va tili: Efiopiya, Amharcha
Toifa: Sotish


Contact 0914839754 @R0bel
0974197825
Are you looking for an electronics for your project sensors, microcontroller, motors e.t.c. so what are you waiting for join now.

Связанные каналы  |  Похожие каналы

Kanal geosi va tili
Efiopiya, Amharcha
Toifa
Sotish
Statistika
Postlar filtri


📌2.4inch Arduino UNO Display

♦️Module PCB Size 72.20*52.7(mm)
♦️Operating Temperature -20℃~60℃
♦️Storage Temperature -30℃~70℃
♦️Operating Voltage 5V/3.3V
♦️Power Consumption TBD
♦️Supports development boards such as Arduino UNO and Mega2560 for plug-in use without wiring
♦️320X240 resolution, clear display,
♦️support for touch function
♦️Support 16-bit RGB 65K color display, display rich colors
♦️8-bit parallel bus, faster than serial SPI refresh
♦️On-board 5V/3.3V level shifting IC,
♦️compatible with 5V/3.3V operating voltage
♦️Easy to expand the experiment with SD card slot
♦️Provides an Arduino library with a rich sample program
♦️Military-grade process standards, long-term stable work
♦️Provide underlying driver technical support

📌Price 3,500 Birr
Contact    📱0914-839754  @R0bel
           📱0974197825
📌 ኣድራሻችን፡ 4 ኪሎ: ቅድስት ስላሴ መንፈሳዊ ኮሌጅ ህንፃ፡ 1ኛ ፎቅ ቢ.ቁ  103ለ


📌Switch Power Supply 48V 11A GY500W-48-A

♦️Switching power supply is short for switching regulated power supply
♦️AC - DC exchanger with an AC voltage input and an DC voltage output.
♦️Metal Enclosed Body is good for Heat Dissipation which Can Prolong the Lifespan of the Power Supply.
♦️Smart device surge protection for Short-circuit Protection, Overload, Over Voltage,Over Temperature Protection.
♦️High efficiency, High Reliability.
♦️Built-in EMI filter, low output ripple, noise, rugged
♦️Widely used in Industrial automation, LED display, CCTV, Radio, Computer Project, LED Strip Lights, 3D Printer

📌Price 12,500 Birr
Contact    📱0914-839754  @R0bel
           📱0974197825
📌 ኣድራሻችን፡ 4 ኪሎ: ቅድስት ስላሴ መንፈሳዊ ኮሌጅ ህንፃ፡ 1ኛ ፎቅ ቢ.ቁ  103ለ


📌B6 V2 Balance Discharger Digital Battery with Zeee 2S 7.4v Lipo Battery

♦️80W 6A DC11V-18V battery charger can support a variety of battery types: LiPo, LiFe, Li-ion, LiHV, NiMH, NiCD, Pb batteries, smart batteries
♦️Charge mode, discharge mode and balance mode
♦️with the charge mode and discharge mode, you can adjust the voltage and current
♦️with the balance mode, it will automatically adjust the voltage and current
✨It Comes With Zeee 2S Lipo Battery 7.4V 5200mAh 80C Hard Case Battery with EC5 Plug
✨Compatible with 1/8 1/10 RC Vehicles Car Slash RC Buggy Truggy RC Airplane Drone

📌 Price; Balance Discharger 10,000 birr
Li-Po Battery 8000 birr

Contact    📱0914-839754  @R0bel
           📱0974197825
📌 ኣድራሻችን፡ 4 ኪሎ: ቅድስት ስላሴ መንፈሳዊ ኮሌጅ ህንፃ፡ 1ኛ ፎቅ ቢ.ቁ  103ለ


📌CNC Laser Control Board

♦️This control board is a 32-bit MCU control board
♦️maximum no-load speed reaches 40000mm/min
♦️the vibration is smaller when the machine moves at high speed, and the performance is more stable
♦️Using the Type-C USB interface
♦️One-piece integrated drive
♦️PWM output frequency 10kHz
♦️higher engraving precision and clearer details
♦️Y-axis dual drive, stronger drive capability;
♦️Support USB automatic identification, when plugged in USB and connected to the computer
♦️offline interface is automatically shielded to avoid offline interference with data
♦️5V power output port, and software controllable, easy to expand various functions;
♦️Support USB flash firmware, firmware upgrade is more convenient
♦️XY limit switch interface each
Self-contained laser anti-burn mode, laser S value >=100
♦️if there is no movement within 5S, an alarm will occur

📌Price 6000 Birr
Contact    📱0914-839754  @R0bel
           📱0974197825
📌 ኣድራሻችን፡ 4 ኪሎ: ቅድስት ስላሴ መንፈሳዊ ኮሌጅ ህንፃ፡ 1ኛ ፎቅ ቢ.ቁ  103ለ


📌MAX485 TTL to RS-485 Interface Module

♦️This low power transceiver module is based on the Maxim MAX485 IC to allow serial communication over very long cable runs (up 4000 feet / 1200 meters).
♦️Serial data can be transmitted in both directions (half duplex) at a data rate up to 2.5Mbps.
♦️The modules operate from a standard 5V power.
♦️Uses differential signaling for noise immunity
♦️Distances up to 1200 meters
♦️Speeds up to 2.5Mbit/Sec
♦️Multi-drop supports up to 32 devices on same bus
♦️Red power LED
♦️Working Voltage: 5V
♦️Main Chip: MAX485
♦️Distances: up to 1200 meters
♦️Speeds: up to 2.5Mbit/Sec
♦️Multi-drop supports: up to 32 devices on same bus
♦️Uses differential signaling for noise immunity
♦️On board 5.08(mm) 2P connector for RS 485 wires
♦️All the pins of the chip are brought out, can be controlled by MCU
♦️Board size: 46mm x 12mm / 1.81”x 0.47”

📌 Price 600 Birr
Contact    📱0914-839754  @R0bel
           📱0974197825
📌 ኣድራሻችን፡ 4 ኪሎ: ቅድስት ስላሴ መንፈሳዊ ኮሌጅ ህንፃ፡ 1ኛ ፎቅ ቢ.ቁ  103ለ


📌 150W CO2 Laser tube

RECI 150W Co2 Laser Tube with Water Cooling Length 1850mm Dia 90mm for CO2 Laser Cutter and Engraver Machine
Specifications:
♦️ Brand: RECI
♦️ Power: 150W
♦️ Length: 1850mm ±10mm
♦️ Tube Diameter: 90mm; Beam diameter: around 6mm
♦️ Input voltage: AC 220V-240V or AC 110V-130V (Specified when order)
♦️ Working Voltage: 28KV ( Triggering Voltage=30KV); Working Current: 30mA
♦️ Max. Output Voltage: DC32KV; Max. Output Current: DC32mA
♦️ Marking Depth:


📌 Inductive proximity Switch
LJ18A3-8-Z/BX 8mm Approach Sensor Inductive Proximity NPN NO Switch DC 10-30V

♦️ Model : LJ18A3-8-Z/BX ;
♦️ Output Type: PNP NO(Normal Open)
♦️ Diameter of Head : 18mm ;
♦️ Detecting Distance : 8mm
♦️ Supply Voltage : DC 10-30V ;
♦️ Current Output : 200mA
♦️ Size : 70 x 30mm/2.8'' x 1.2'' (L*Max. Dia)
♦️ Weight : 80g ;
♦️ Package Content : 1 x Inductive Proximity Switch

📌 Price 1800 Birr
Contact    📱0914-839754  @R0bel
           📱0974197825
📌 ኣድራሻችን፡ 4 ኪሎ: ቅድስት ስላሴ መንፈሳዊ ኮሌጅ ህንፃ፡ 1ኛ ፎቅ ቢ.ቁ  103ለ


📌Nema 23 Stepper Motor

High Torque Nema 23 CNC Stepper Motor 114mm/3Nm CNC Mill Lathe Router
Product Description
This is the strongest model for Nema 23 stepper motor, it with 1.8 deg. step angle (200 steps/revolution).
Each phase draws 4.2A, allowing for a holding torque of 3.0Nm(425oz.in).
✨ Electrical Specification:
♦️ Motor Type: Bipolar Stepper
♦️ Step Angle: 1.8 deg.
♦️ Holding Torque: 3.0Nm(425oz.in)
♦️ Rated Current/phase: 4.2A
♦️ Phase Resistance: 0.9ohms
♦️ Inductance: 3.8mH+/-20%(1KHz)
✨ Physical Specification:
♦️ Frame Size: 57 x 57mm
♦️ Body Length: 113mm
♦️ Shaft Diameter: 10mm
♦️ Shaft Length: 24mm
♦️ D-cut Length: 20mm
♦️ Number of Leads: 4
♦️ Lead Length: 400mm
♦️ Weight: 1.8kg
✨ Connection:
Black(A+), Green(A-), Red(B+), Blue(B-)

Price: 9500 Birr
Contact    📱0914-839754  @R0bel
           📱0974197825
📌 ኣድራሻችን፡ 4 ኪሎ: ቅድስት ስላሴ መንፈሳዊ ኮሌጅ ህንፃ፡ 1ኛ ፎቅ ቢ.ቁ  103ለ


📌EGG TURNER MOTOR 14W

♦️This is hatchpro 14W motor can be used industrial incubator and medium incubator to rotate the turning unit by 45 degree
♦️The egg turner is a synchronous motor with a speed reduction mechanism and synchronous reversible option.
♦️It has low power consumption, large torque, low noise, small volume, is lightweight with easy-to-use features.
♦️Rated Voltage: AC 220V
♦️Rated Frequency: 50Hz
♦️Input Power: 14W
♦️Rotating speed: 2.5 r/min
♦️Torque : 80kgcm
♦️Motor type: AC Synchronous
♦️It can turn forward and backward the egg turner unit in incubator
♦️Lower Power consumption


📌 Price 6000 birr
Contact    📱0914-839754  @R0bel
           📱0974197825
📌 ኣድራሻችን፡ 4 ኪሎ: ቅድስት ስላሴ መንፈሳዊ ኮሌጅ ህንፃ፡ 1ኛ ፎቅ ቢ.ቁ  103ለ


📌7 in 1 Soil NPK SENSOR

♦️High precision agriculture sensors, rapid response, good exchange ability
♦️ Good tightness, corrosion resistance, the soil tester can be used in the soil for a long time.
♦️ Flame retardant epoxy resin curing, completely waterproof, the soil tester can withstand strong external impact.
♦️ Steel needles are made of high quality materials that can with stand long-term electrolysis , acid and alkali corrosion in soil
♦️Power Supply: 12-24V DC
♦️Output Singal: RS485/4G/NB-IoT/LORA
♦️Protection level: IP68
♦️Temperature measuring range: -45℃-115℃
♦️Moisture measuring range: 0-100%RH
♦️PH measuring range: 3-9PH
♦️NPK measuring range: 0-1999mg/kg

📌 Price 9500 birr
Contact    📱0914-839754  @R0bel
           📱0974197825
📌 ኣድራሻችን፡ 4 ኪሎ: ቅድስት ስላሴ መንፈሳዊ ኮሌጅ ህንፃ፡ 1ኛ ፎቅ ቢ.ቁ  103ለ


📌Rotary Encoder Module

♦️The rotary encoder is used to measure the speed and with PWM technology can achieve rapid speed devices
♦️With fixed bolt hole for easy installation
♦️Rotation Range: 360 degrees (continuous rotation)
♦️Life Cycle: Over 10,000,000 rotations for the encode
♦️Switch Type: Mechanical switch (push-button), which can be pressed and released to provide a signal
♦️Great for DIY project
♦️Model: KY-040
♦️Max Rotation Speed: Depends on the implementation and the frequency of signal processing, typically up to several thousand rotations per minute (RPM)
♦️Working voltage: 5V
♦️Material: PCB + Brass
♦️Current Consumption: Typically around 10–20 mA when idle
♦️Weight: 10g
♦️Size: 32 x 19 mm


📌 Price 650 birr
Contact    📱0914-839754  @R0bel
           📱0974197825
📌 ኣድራሻችን፡ 4 ኪሎ: ቅድስት ስላሴ መንፈሳዊ ኮሌጅ ህንፃ፡ 1ኛ ፎቅ ቢ.ቁ  103ለ


📌Arduino Nano Controller Board Module

♦️Hardware Interface USB
♦️Product Dimensions 0.7"L x 0.23"W x 1.77"H
♦️Compatible Devices Arduino Mini, Arduino Nano V3.0, ATmega328P
♦️The Nano is using the chips ATmega328P and CH340, Replace FT232RL.
♦️Analog input pins and onboard +5V AREF jumper.
♦️Nano's got the breadboard-ability of the Boarduino and the Mini+USB with smaller footprint than either, so users have more breadboard space.
♦️It's got a pin layout that works well with the Mini or the Basic Stamp (TX, RX, ATN, GND on one top, power and ground on the other).
♦️The Nano can be powered via the Mini-B USB connection
♦️7-12V unregulated external power supply (pin 30), or 5V regulated external power supply (pin 27)
♦️Arduino Nano V3.0 ATMEGA328P Improved version with 3pcs pin headers (2pcs 15pin headers +1pcs 6pin headers).


📌 Price 1150 birr
Contact    📱0914-839754  @R0bel
           📱0974197825
📌 ኣድራሻችን፡ 4 ኪሎ: ቅድስት ስላሴ መንፈሳዊ ኮሌጅ ህንፃ፡ 1ኛ ፎቅ ቢ.ቁ  103ለ


ውድ ደንበኞቻችን ከ DIGITAL ELECTRONICS SHOPPING እቃ ሲገዙ እንደቃው አይነት ከ 50% ክፍያ ጀምሮ እስከ ሙሉ በሙሉ ነፃ የ DELIVERY አገልግሎት መጀመራችንን በደስታ እንገልፃለን

ለበለጠ መረጃ 📱 09-14-83-97-54 @R0bel
📱09-74-19-78-25
📌 ኣድራሻችን፡ 4 ኪሎ: ቅድስት ስላሴ መንፈሳዊ ኮሌጅ ህንፃ፡ 1ኛ ፎቅ ቢ.ቁ 103ለ


📌 Thermoelectric Peltier

♦️Model: TEC1-12706
♦️Each device is full and inspected tested
♦️Fitted with 15.24 cm insulated leads
♦️Size: 40 mm x 40 mm x 3.8 mm
♦️Get ice cold in minutes or heat to boiling by simply reversing the polarity, used for numerous applications from CPU coolers to alternate power sources, or even for your own custom car drink hot/cooler
♦️Wire size: lead length 300±8mm RV standard wire single head 5mm tinned
♦️Maximum temperature difference: Tmax (Qc=0) above 68°C

📌 Price 750 birr
Contact    📱0914-839754  @R0bel
           📱0974197825
📌 ኣድራሻችን፡ 4 ኪሎ: ቅድስት ስላሴ መንፈሳዊ ኮሌጅ ህንፃ፡ 1ኛ ፎቅ ቢ.ቁ  103ለ


📌 AITRIP 10 Pieces 0.96 Inch OLED I2C IIC Display Module 12864 128x64 SSD1306 Mini Self-Luminous Display Board Compatible with Arduino/Raspberry PI -White

♦️I2C Interface:
♦️GND: Ground
♦️VCC: 3.3V~5V
♦️SCL: I2C Serial Clock (UNO: A5; MEGA: 21)
♦️SDA: I2C Serial Data (UNO: A4; MEGA: 20)
Features:
♦️OLED self-luminous, no backlight
♦️Size: 0.96”
♦️Driver IC: SSD1306
♦️Voltage: 3.3V-5V DC
♦️Viewing angle: > 160°
♦️High resolution: 128 x 64
♦️Working Temperature: -30°C~70°C
♦️Display: 2 rows of yellow, 6 rows of blue
♦️Module Size: 27mmx 27mm x 4mm
♦️Screen material: glass, need good protection

📌 Price 600 birr
Contact    📱0914-839754  @R0bel
           📱0974197825
📌 ኣድራሻችን፡ 4 ኪሎ: ቅድስት ስላሴ መንፈሳዊ ኮሌጅ ህንፃ፡ 1ኛ ፎቅ ቢ.ቁ  103ለ


📌 120 Degree v groove bitGeneral Information
Type: V-Groove Bit
♦️ Angle: 120 degrees
♦️ Shank Diameter: 6 mm (0.236 inches)
♦️ Wing Span: 31 mm (1.22 inches)
Material Composition
♦️ Body Material: High-speed steel (HSS)
Dimensions
♦️ Overall Length (OAL): 49mm
♦️ Cutting Angle/Tip Angle: 120 degree
♦️ The specified angle of the cutting edge is critical for producing sharp edges.
♦️ Recommended RPM... between 10,000 to 20,000 RPM.
♦️ Feed rates... range from slow (12 inches/minute) to moderate (40 inches/minute).
♦️ Compatible with CNC routers and other milling machines that accommodate a shank diameter of at least 6mm.
Applications
♦️ The specified V-groove bit is suitable for applications including:
♦️ Woodworking projects requiring intricate designs.
♦️ Creating joints in cabinetry or furniture making.
♦️ Engraving patterns on various materials like MDF, acrylics, or light metals.


📌 Price
Contact    📱0914-839754  @R0bel
           📱0974197825
📌 ኣድራሻችን፡ 4 ኪሎ: ቅድስት ስላሴ መንፈሳዊ ኮሌጅ ህንፃ፡ 1ኛ ፎቅ ቢ.ቁ  103ለ


Micro Roller Limit Switch
KW12-3 Micro Roller Lever Arm Normally Open Close Limit Switch
♦️ Operation Mode Mechanical
♦️ Current Rating 5 Amps
♦️ Operating Voltage 125 Volts (AC)
♦️ Contact Type Normally Open
♦️ Terminal Pins
♦️ Actuator Type Lever
♦️ Connectivity Protocol X-10
♦️ Color Black
Application: Apply in A computer mouse, car mouse, automobile electronic products, communications equipment, military products, test instrument, gas water heater, gas burner,

📌 Price 200 Birr
Contact    📱0914-839754  @R0bel
           📱0974197825
📌 ኣድራሻችን፡ 4 ኪሎ: ቅድስት ስላሴ መንፈሳዊ ኮሌጅ ህንፃ፡ 1ኛ ፎቅ ቢ.ቁ  103ለ


📌 I2C /TWI/SP I Serial Interface Board
♦️ Name: 1602LCD Display for Arduino
♦️ Supply voltage: 2.5-6V
♦️ Compatible: Come with 2 IIC interface, which can be connected by Dupont Line or IIC dedicated cable
♦️ I2C Address: 0X20~0X27 (the original address is? 0X20,you can change it yourself)
♦️ Size: 41.5 mm(L) * 19 mm(W) * 15.3 mm(H)
Specification:
♦️ This is another great IIC/I2C/TWI/SPI Serial Interface.
♦️ As the pin resources of Arduino controller is limited, your project may be not able to use normal LCD shield after connected with a certain quantity of sensors or SD card.
♦️ However, with this I2C interface module, you will be able to realize data display via only 2 wires.
♦️ If you already has I2C devices in your project, this LCD module actually cost no more resources at all. It is fantastic for Arduino based project.

📌 Price 550 Birr
Contact    📱0914-839754  @R0bel
           📱0974197825
📌 ኣድራሻችን፡ 4 ኪሎ: ቅድስት ስላሴ መንፈሳዊ ኮሌጅ ህንፃ፡ 1ኛ ፎቅ ቢ.ቁ  103ለ


📌 MG996R Metal gear servo motor
The MG996R is a high-torque digital servo motor designed for various applications, including robotics and RC vehicles.
♦️ Weighing approximately 55 grams, it features metal gears for enhanced durability and strength. With a torque rating of up to 13 kg-cm (at 6V), it provides reliable performance and precise control.
♦️ Its PWM control signal allows for accurate positioning, making it suitable for tasks that require fast response times and stability under load.
♦️ The MG996R is an excellent choice for hobbyists and professionals seeking robust servos with strong performance characteristics.
♦️ Universally Applicable: Micro Servo Motor for 1:10 RC car robot helicopter
♦️ Brand Deegoo-FPV
♦️ Voltage 7.2 Volts, 5 Volts, 6 Volts, 4.8 Volts
♦️ Product Dimensions 40mm W x 30mm H
♦️ Material Metal, Rubber

📌 Price 1050 Birr
Contact    📱0914-839754  @R0bel
           📱0974197825
📌 ኣድራሻችን፡ 4 ኪሎ: ቅድስት ስላሴ መንፈሳዊ ኮሌጅ ህንፃ፡ 1ኛ ፎቅ ቢ.ቁ  103ለ


📌 Sg90 9g Micro Servo Motor
Sg90 9g Micro Servo Motor, Miuzei Mini Servos Motor Kit Metal Gear Servo for Arduino Project, Small Servo for Rc Car Airplane Robot
♦️ Stronger force-bearing capacity, not easy to deform;
♦️ Rc Micro Servos Easy to turn, no deformation when heated;
♦️ The metal material has higher hardness and abrasion resistant;
♦️ The gear mandrels of the potentiometers are made of metal and do not deform under strong force;
♦️ Control system:Change the pulse width
♦️ Amplifier type:Analog controller
♦️ Operating Voltage Range:4.8V~6.0V
♦️ Operating speed (at no load) 0.09±0.01 sec/60°(4.8V ) 0.08±0.01 sec/60°(6V)
♦️ Running current (at no load) 400±30mA (4.8V ) 500±30mA(6V)
♦️ Stall torque (at locked) 2.0±0.20kg·cm (4.8V ) 2.2±0.20kg·cm(6V)
♦️ Stall current (at locked) 1300±40mA (4.8V ) 1600±50mA(6v)
♦️ Idle current (at stopped) 6±1mA (4.8V ) 6±1mA(6v)


📌 Price 900 Birr
Contact    📱0914-839754  @R0bel
           📱0974197825
📌 ኣድራሻችን፡ 4 ኪሎ: ቅድስት ስላሴ መንፈሳዊ ኮሌጅ ህንፃ፡ 1ኛ ፎቅ ቢ.ቁ  103ለ

20 ta oxirgi post ko‘rsatilgan.