📌MAX485 TTL to RS-485 Interface Module
♦️This low power transceiver module is based on the Maxim MAX485 IC to allow serial communication over very long cable runs (up 4000 feet / 1200 meters).
♦️Serial data can be transmitted in both directions (half duplex) at a data rate up to 2.5Mbps.
♦️The modules operate from a standard 5V power.
♦️Uses differential signaling for noise immunity
♦️Distances up to 1200 meters
♦️Speeds up to 2.5Mbit/Sec
♦️Multi-drop supports up to 32 devices on same bus
♦️Red power LED
♦️Working Voltage: 5V
♦️Main Chip: MAX485
♦️Distances: up to 1200 meters
♦️Speeds: up to 2.5Mbit/Sec
♦️Multi-drop supports: up to 32 devices on same bus
♦️Uses differential signaling for noise immunity
♦️On board 5.08(mm) 2P connector for RS 485 wires
♦️All the pins of the chip are brought out, can be controlled by MCU
♦️Board size: 46mm x 12mm / 1.81”x 0.47”
📌 Price 600 Birr
Contact 📱0914-839754 @R0bel
📱0974197825
📌 ኣድራሻችን፡ 4 ኪሎ: ቅድስት ስላሴ መንፈሳዊ ኮሌጅ ህንፃ፡ 1ኛ ፎቅ ቢ.ቁ 103ለ
♦️This low power transceiver module is based on the Maxim MAX485 IC to allow serial communication over very long cable runs (up 4000 feet / 1200 meters).
♦️Serial data can be transmitted in both directions (half duplex) at a data rate up to 2.5Mbps.
♦️The modules operate from a standard 5V power.
♦️Uses differential signaling for noise immunity
♦️Distances up to 1200 meters
♦️Speeds up to 2.5Mbit/Sec
♦️Multi-drop supports up to 32 devices on same bus
♦️Red power LED
♦️Working Voltage: 5V
♦️Main Chip: MAX485
♦️Distances: up to 1200 meters
♦️Speeds: up to 2.5Mbit/Sec
♦️Multi-drop supports: up to 32 devices on same bus
♦️Uses differential signaling for noise immunity
♦️On board 5.08(mm) 2P connector for RS 485 wires
♦️All the pins of the chip are brought out, can be controlled by MCU
♦️Board size: 46mm x 12mm / 1.81”x 0.47”
📌 Price 600 Birr
Contact 📱0914-839754 @R0bel
📱0974197825
📌 ኣድራሻችን፡ 4 ኪሎ: ቅድስት ስላሴ መንፈሳዊ ኮሌጅ ህንፃ፡ 1ኛ ፎቅ ቢ.ቁ 103ለ