ምስልን በትክክል እና በጥራት እንዲታይ እነዚ የፓኔል ሲግናሎች ወሳኝ እና ምስሉን ለመቆጣጠር የሚረዱን ልናውቃቸው የሚገቡ በ abbreviations describing የተደረጉ ናቸው። GIP (Gate In Panel)
Gate (G): This signal is used to control the opening and closing of a channel on the screen.
In Panel (IP): It is the location or area within the screen that is important for connecting various screen capabilities. In Panel signals include VGH, VDD, AVDD, etc.
VGH (Gate High Voltage):
It is the signal voltage used to control the information channel of the row of pixels on the screen.
VGL (Gate Low Voltage):
It is the signal voltage used to control the guide channel of the bottom row of pixels on the screen.
VON (Voltage ON):
It is a signal used to enable or activate screen row controls.
VOFF (Voltage OFF):
It is a signal used to close or stop the screen row control.
VSS (Voltage Source Ground):
It is the reference low voltage power supply for the electronics in the display.
VCC (Voltage Common Collector):
It is a common power supply for screen electronics.
VDD (Digital Power Supply Voltage):
is the power supply voltage to the digital part of the screen.
AVDD (Analog Power Supply Voltage):
is the power supply voltage to the analog portion of the screen.
HVDD (High Voltage Digital Power Supply):
It is the voltage that supplies power to the high voltage digital part of the screen.
VCOM (Common Voltage):
It is the signal voltage used to adjust the vertical axis of the screen to balance and sharpen the image.
CPV (Common Power Voltage):
is the power supply voltage to the common part of the screen.
CKV (Clock Vertical):
It is the clock signal used to adjust the vertical axis of the screen.
CKVB (Clock Vertical Back):
It is the clock signal used in the process of returning the control signal to the vertical display portion of the screen.
STV (Start Vertical):
It is a signal used to indicate the starting position of a vertical row on the screen.
VGH_EVEN (Gate High Voltage - Even):
It is the signal voltage used to control the information channel of the double row of pixels on the screen.
VGH_ODD (Gate High Voltage - Odd):
It is the signal voltage used to control the data channel of the odd row of pixels on the screen.
OE (Output Enable):
It is a signal used to open or close a product or system design.
LR (Left/Right):
It is a signal used to indicate the horizontal scrolling of the screen.
POL (Polarity Control):
It is a signal used to control the selection of an image display mode such as landscape or portrait.
UD (Up/Down):
It is a signal used to indicate the vertical scrolling of the screen.
DE (Data Enable):
This signal is used to enable or disable the transmission of image data to the screen.
XAO (X Address Output):
It is a signal used to send screen row position information.
XON (X Address On):
This signal is used to enable or enable screen row position information.
📣አሁንም ስልጠናዎቻችንን በቀላሉ በቤትዎ ሆነው ለመከታተል
1️⃣ ጠቅላላ የቲቪ ጥገና ስልጠና ከሙሉ ኤሌክትሮኒስ ጋር = 1500
2️⃣ ጠቅላላ የሪሲቨር ጥገና Electronics + Software + Hardware = 1000
3️⃣ጠቅላላ የጂፓስ ጥገና ስልጠና ከሙሉ የኤሌክትሮኒስ ትምህርት ጋር = 1000
📣 ጠቅላላውን የስልጠናችንን ፕሮግራሞች ለመከታተል
💲1000139090822 Cbe
💲01320263863800 Awash
ገቢ በማድረግ ደረሰኝ ወይም Screenshot በመላክ በቀጥታ የስልጠናው አባል ይሁኑ
🌟 +251930756350
🌟 +251703756350
🤤
@YONSAT1🤤
@YONSAT2🛑 ይህ ደረሰኝ እንዲሁም የተለያዩ መረጃዎችን የምንለዋወጥበት Public ቻናላችን ነው።